Installation notice of circular vibrating screen punching mesh

General screen meshes include manganese steel woven wire mesh, punching mesh and stainless steel screen plate etc. Each kind mesh should be selected according to the on-site working condition. Today we will talk about the installation of punching screen mesh.
The punching screen mesh installation method for circular vibrating screen is the same with dewatering screen.
Generally speaking, the slurry dewatering screen is horizontally installed,however, in order to guarantee the application effect, the screen mesh is installed with a negative angle. The screen mesh can be polyurethane material with tension type installation, or stainless steel bar screen mesh with compression type to meet different working conditions.

 

Circular vibrating screen is installed with angle, when adopt the punching screen mesh, it needs lumps of wood to press tightly, then tension with wood key . Please see the following sketch: 
If the screen mesh tension is not enough, it will bring negative influence:
1.The screen mesh is easy to bend and the screen mesh will slack and easy to revibrate. Meanwhile it will reduce the screen mesh service life. 
2.It will influence the effective screen surface, reduce the screening efficiency.
3.It will stop the material moving forward and reduce the capacity.
In this regard,in order to guarantee the smooth screen mesh , increase the service life and guarantee the capacity and screening efficiency, the tension of screen mesh must be improved. 

Linear vibrating screen installation and debugging

 1. The linear vibrating screen machine in flat ground level solid (Concrete or steel structure surface), Anchor bolt (bolt penetrates based user owned), fastening.

2. The linear vibrating screen spring sets in, the seat ring(placed a screen body). Spring should be fully into the spring retainer, Ensure vertical, not twisted.

3. Linear vibrating screen vibration sieve machine parts of other objects not and machine of any rigid connection or contact.

4. Connect the power supply, Press the start button (this machine can be started directly), The vibration motor synchronous rotating in the opposite direction.

5. The adjustment of excitation force: At both ends of the eccentric block vibration motor linear vibrating screen for debugging, angle adjustment two eccentric body can change the vibration service size, Sieve machine factory before excitation has been transferred to the best state of affairs, direct access to the use of, There is without for further adjustment.

6. When necessary, can be adjusted according to the following methods: Open both ends of motor protective cover, loosen the eccentric locking bolt, The ends of the adjustable eccentric block to rotate in the same direction, The numerical para noses the reticle, the required excitation force. After adjustment, the fastening bolt is screwed down.

7. Linear vibrating screen in the open, stopping by the isolation zone will produce big vibration, To improve this situation, can be matched with the electric brake device